Glare is one of the problems often encountered lamps, downlights glare which the most representative. Many designers do not understand how to avoid the glare of lamps, do not know how to choose the right anti-glare lighting.

Today teach you six kinds of methods to solve the glare. Before we begin, let's take a look, under what circumstances, the human eye will feel the "glare" and what is the anti-glare lighting.

Note that the human eye sight is normal, as the top level to the bottom 30 ° 60 °, glare occurs within this range, it is glare. As long as the light emitted from the lamp full control over the light-cutting angle> 30 ° of it, we can say this lighting fixture is Anti-glare..

So, how to solve the problem of glare lighting it? Come! Learn this six strokes, glare go without a trace.

1.Cut-off angle> 30 degrees

When conventional lamp shielding angle is based on the normal human vision elevation of 30 degrees, lamp shielding angle greater than 30 degrees, in order to avoid the light directly into the eye.

2.Increasing the mounting height of the light source

Deep shine of the lamp under other structures remain unchanged, increasing the mounting height of the light source, in order to achieve the purpose of increasing the shading angle.

3.Conventional lights + cross-glare lamp shielding angle

Cross antiglare grille mainly blocked in both directions vertical and horizontal light. The critical position of glare from the boundary adjustment to center the lamp, thereby increasing the shading angle, to achieve the purpose of anti-glare.

4.Conventional lights + antiglare honeycomb

Honeycomb grille net can block the glare of the light in all directions, all the accessories glare, anti-glare effect best, accessible shielding angle 90 °. Light loss is greatest.

5.Conventional lights + Blackout leaves

Blackout leaves can be blocked in all directions, lights for easy shaping, forming angle from the lamp itself to completely block the light shielding effect, it is the most flexible antiglare accessories, is the most cool appearance plus factor.

Because large parts, usually used in conjunction with track lights, glare at the same time, enhance the overall image of the decoration.

6.Soft Glass

Including soft frosted glass, wove glass, Gyrosigma + frosted glass, etc., can to a certain extent, reduce the brightness of the surface light source, to a certain extent, to achieve anti-glare effect.

Well, learn this six strokes,no more glare, Anti-glare is so easy!

At end, I want introduce we change the lens angle to make the Anti- glare.