1. Modular pluggable technology, easy tool onsite maintenance;
2. Honeycomb briquette burning effect and the whole structure cooling technology;
3. Double-coupling IP68 protection, highest waterproof level; Metal structure, high mechanical strength;
4. Ergonomic light distribution to achieve uniform illuminating effect; Free modular serialization and full power range solution.
Applications
Street lighting
Parking lots
Roadway lighting
Path lighting
Standard Colors
White
Gray
Black
Blue+White
Photoelectric parameter specification(Lumieleds)
Product Type
Input (V)
Frequency(Hz)
Currency (mA)
Watts (W)
M1
M8
Power Factor
Driver Effect
LED Brand
CCT (K)
CRI
Lighting Effect (lm/W)
Luminous Flux(lm)
Lighting Effect
(lm/W)
Luminous Flux(lm)
T18A-3
AC100-240
50/60
700
120
110±5
13200±600
115±5
13800±600
0.95
91%
Lumileds
3000① 4000 5000 5700
≥70
860
150
105±5
15750±750
110±5
16500±750
1050
180
100±5
18000±900
105±5
18900±900
T18A-4
AC100-240
50/60
700
160
110±5
17600±800
115±5
18400±800
0.95
91%
860
200
105±5
21000±1000
110±5
22000±1000
1050
240
100±5
24000±1200
105±5
25200±1200
Photoelectric parameter specification(Customize)
Product Type
Input (V) Frequency(Hz)
Currency(mA)
Watts (W)
M16
Power
Factor
Driver
Effect
LED Brand
CCT (K)
CRI
Lighting Effect(lm/W)
Luminous(lm)
T18A-3
AC100-240
50/60
800(9in parallel 2 in series)
120
150±8
18000±960
0.95
91%
Customized
High Power LEDs
3000 4000 5000 5700
≥70
800(14in parallel 2 in series)
120
158±8
18960±960
1000(9in parallel 2 in series)
150
143±8
21450±1200
1000(14in parallel 2 in series)
150
152±8
22800±1200
1200(9in parallel 2 in series)
180
135±8
24300±1440
1200(14in parallel 2 in series)
180
145±8
26100±1440
T18A-4
AC100-240
50/60
800(9in parallel 2 in series)
160
150±8
24000±1280
0.95
91%
800(14in parallel 2 in series)
160
158±8
25280±1280
1000(9in parallel 2 in series)
200
143±8
28600±1600
1000(14in parallel 2 in series)
200
152±8
30400±1600
1200(9in parallel 2 in series)
240
135±8
32400±1920
1200(14in parallel 2 in series)
240
145±8
34800±1920
Product working environment and packing parameter
Product Type
Working environment
Stocking Temperature
IP rate
Surge voltage
LED LifeÂÂÂÂ (h)
Fixture
material
Holder size(mm)
Product size (mm)
Packing (mm)
NW (kg)
GW (kg)
T18A-3
-40℃~+50℃
10%~90%RH
-40℃~+50℃
Whole lamp IP67
≥10KV
>50000
Aluminum
60±5
950*400*210
1030*420*300
8.9
10.0
T18A-4
-40℃~+50℃
10%~90%RH
-40℃~+50℃
Whole lamp IP67
≥10KV
>50000
Aluminum
60±5
950*400*210
1030*420*300
9.9
11.0
Internal Design Features
Dimensions
T18A-3
T28A-4
Installation Induction
Installation steps
1.Open the two clasps of the shell and open the lamp.
2. Screw the four M10 x 30 inner hexagon screw on the lamppost.
3. Insert the lamp into the lamp and tighten the four M10 x 30 inner hexagon screw on the lamp-press.
4. Connect the power cord correctly and prevent the wrong connection. The earth wire should be reliably grounded.
5. Cover the top, tighten the clasp, and complete the installation. LED Driver Maintenance
LED driver maintenance instructions
1. Open the two clasps on the shell and open the lamp.
2. Unscrew the four M4 x 10 cross head screws at both ends of the power supply.
3. Unscrew the waterproof cable between the power supply and the module.
4. Remove the damage and replace the source.
5. In turn, the components are returned to complete maintenance
LED Module Maintenance
LED module maintenance instructions
1. Open the two clasps of the shell and open the lamp.
2. Screw the four M4 x 10 cross grooves at both ends of the die set.
3. Unscrew the waterproof connector between the power supply and the module.
4. Remove the damaged module and replace the module.
5. In turn, put the components are returned to complete maintenance.