The lighting used in our daily life is essential. Everyone's daily lighting at home also costs a lot of electricity and energy. How can we save electricity and lighting?
1、 Frequency switch is not suitable for energy saving lamp

The energy-saving lamp consumes the most power when it is started, and every time it is switched on and off, the life of the bulb will be reduced by about 3 hours, so it is recommended to reduce the switching frequency of the energy-saving lamp as much as possible.

2、 Reasonable choice of lighting degree

For incandescent lamps, generally speaking, the bathroom lighting is only 2 watts per square meter. The dining room and kitchen have 4 watts per square meter. The study and living room should be larger, 8 watts per square meter; the desk lamp on the desk and bedside table can use 15-60 watts of light bulb, preferably no more than 60 watts.

If the incandescent lamp used for indoor lighting is changed into energy-saving lamp, the 18 watt energy-saving lamp is equivalent to the brightness of 40 Watt ordinary T8 fluorescent lamp. If the electronic ballast is used, the energy-saving lamp can be started when the voltage is 150V, at this time, its power consumption per hour is only 0.1W, low energy consumption and safety

3、 Regular cleaning of lighting fixtures

When the lamps are not cleaned for a long time, dust gradually accumulates in the tubes and reflectors, which leads to the reduction of output efficiency. Therefore, the lamps shall be cleaned at least once every three months to maintain the output efficiency of the lamps

4、 Replace the old lamp regularly

The newly launched series of energy-saving lamps of tube in tube energy-saving lamp can be selected. When the incandescent lamp and fluorescent lamp are used to 80% of their service life, the output beam will be reduced to 85%, so it is advisable to replace them before the end of their service life. For the office building with a large number of lighting, regular replacement of light source is particularly important. In addition to saving the labor cost of replacing lamps and improving the indoor illumination, it can also save electricity.

5、 Replace inefficient light sources or lamps

To replace incandescent lamps with energy-saving lamps, incandescent lamps consume about three times as much electricity as energy-saving lamps. For places with long lighting time or infrequent switching actions, such as living rooms and bedrooms . etc. The purpose of saving electricity can be achieved immediately by removing the incandescent lamp and using the energy-saving lamp series light source. Save electricity, save energy from you and me, from every drop, save energy and environmental protection - only for the continuation of the wonderful earth